How To Open Ps3 Slim To Clean

Bought a used ps3 slim and want to get rid of possible internal dust. Wondering if the experts here has any tips to get rid of the internal dust. Press j to jump to the feed.

Remove the screw from the side of the console and the warranty sticker. This is done with the small flat head screwdriver. Then slide the lid of the top of the console.

Remove 7 screws from top of console shell, and then pull upward. ; With enough force the shell of the console pop’s loose. First, make sure your disk drive is empty.

If you have the original version of the ps3 you need to turn your ps3 from standby to off by flipping the switch on the back of the system. Hold down the eject button and then flip the switch back on. If you have the ps3 slim you need to unplug the power cable from the system.

Take apart your ps3 slim — in 6 easy steps step 1. Turn the slim ps3 over so we can expose the screws under the rubber feet. There are 8 screws that need to be.

After all the screws from the bottom are removed, you can easily lift the top of the unit open to expose the. Move the optical disk reader assembly to the left to expose one of the screws holding the power supply in. Remove the two phillip #1 screws indicated and carefully disconnect the cable on the right side of the power supply.

Lift the power supply straight up to remove it. The left side has a board connector underneath, so there will be. To clean the inside of the playstation 3 slim, you should take a swab to remove the internal dust.

You should use a cotton swab to wipe the vents of the console. You can also use a cloth to wipe off the plastic cases. You can also clean the outside of the playstation 3 slim by spraying it with canned air.

How do i clean my ps3 super slim fan? To clean your ps3 super slim fan, first remove the fan by unscrewing the screws on each side. Then use a vacuum cleaner to clean the fan.

Be sure to use the crevice tool to get into the tight spaces. Finally, dry the fan off with a.