Hi, in this video i attempt to fix a game boy advance sp with multiple faults. The known faults are a faulty game card slot, faulty charging port, faulty rig. Hold the top piece in place while you open the console.
Screw in the five screws salvaged from the old housing around the perimeter of the screen. Place screw covers over the screws. You can use your old ones or the ones that came with the new housing.
It is the penultimate console in the game boy advance family before the game boy micro,. In this video, i demonstrate how to change the battery in a gameboy advance sp model. It's relatively simple and straightforward, and should take less than a.
Step 3 lower case. Remove the 6 tripoint screws holding the case together. Pry the 2 halves apart.
Do not force it though, or you may break your gba. Set the bottom half away for later. Be sure not to lose the small, square nut that hold the battery compartment nut in or else you will not be able to screw the battery compartment in.
Look at the label. Sometimes, the label will be a custom one different from the official one. There are many things that can be altered:
The nintendo logo, the esrb rating icon, and the game boy advance logo. Search the cartridge on google images and compare them. Carefully maneuver the ribbon cable out of the hinge area and set the screen aside.
You just took apart your gba sp!! I left the hinge together as i couldn’t figure out how to take it apart safely. The last screw on the right is not included on some game boy advance systems.
Pull circuit board away from the front panel by pulling up at the bottom of the circuit board, keeping the top ribbon still connected. Beware not to damage the top ribbon by pulling up. I open a piece of history the gameboy advanced sp game cartridge.
So i took it apart, you need special screeve drive for it, then i resolder two parts out and solder just peace of wire to sort it and bingo it power on and. The game boy advance sp was the first of nintendo's handheld devices to implement a rechargeable battery instead of disposable batteries. The game boy advance sp is the predecessor to the nintendo ds.
Firmly insert a game pak into the game pak slot on the underside of the game boy advance sp, so that the label side of the game pak is facing away from the. Press firmly until the cartridge clicks into place. Don't force the cartridge in, you should just need some firm pressure to lock it into place.
Push the power switch towards the screen. This will turn the game boy advance sp on. The power switch can be found along the right edge.
